Product Features : Input Voltage : 6V~10V Glow Plug Voltage : 1.4V 6 Amps Max Push Button for 15 Seconds Glow Auto Off Short Circuit and Over Current Protection Auto Load Sense Detects Wet Plug Lithium Ion/Po : 2S3S; NiCd/MH >90%High Efficiency Switchmode Design Lightweight for direct installation in model. LED Switch Clearly indicates operation Applications Onboard Airplane/Heli Glow Engines Suits All Other Glow Engines Replaces All Other Glow Ignitors Lithium Power always ready Replaces Flight box glow driver Application Notes With the advent of high capacity NiCD/NiMH or Lithium flight packs, it becomes possible to power the glow plug directly from the flight pack. High efficiency switch mode supply ensures minimal drain on flight pack. Push the LED indicator switch and the glow plug is lit for 15 seconds. LED lights to indicate glow. After 15 seconds the onboard glow driver (RCD3001) reverts to sleep mode. Each push of the button only supplies 15 seconds of power to the glow plug. More than sufficient to start the a glow engine. The use of high rate switch mode circuitry (500KHz) coupled with Ultra Low ESR components allows an efficiency rate of >90% to be achieved. Thereby minimising current drain on flight pack if used as on board glow. Mil spec engineering also ensure ultra low EMI operations. Glow head voltage is held at 1.4 Volts. Wet plug detect circuitry boosts current output to ensure consistent plug heat range. No danger of blowing those expensive glow plugs. Short circuit and over current protection ensures that flight packs and RCD3001 Featherweight Glow Driver is fully protected from damage. Self protection circuitry shuts down the glow driver and normal operations return after unit has cooled down.
หน้าแรก
สินค้า
บทความ
รวมรูปภาพ
เว็บบอร์ด
ติดต่อเรา